Skip to content
Appliance Error Codes

What Does 1E Error Mean on Samsung WW6000J PROJECT, WW22K6800AW?

Error 1E on Samsung WW6000J PROJECT, WW22K6800AW: 1E indicates a water level sensor issue in Samsung washing machines like the WW6. Follow the troubleshooting steps below to diagnose and fix this washer issue. 1E indicates a water level sensor malfunction in Samsung washing machines like the WW6000J PROJECT and WW22K6800AW models. This error occurs when the machine cannot accurately detect water levels during cycles. Users can attempt basic troubleshooting like checking for hose obstructions or restarting the appliance. If unresolved, professional service is required as it involves electrical component diagnosis. According to Samsung’s technical documentation, this accounts for 12% of washer service calls in these models. ## What Does 1E Mean? The 1E error code specifically signals a failure in the pressure switch system that monitors water levels in Samsung front-load washers. The washing machine’s main control board detects abnormal resistance values from the water level sensor circuit (typically expecting 15-25 kΩ when empty). This disruption prevents proper cycle progression and automatically triggers error 1E. Samsung’s WW6000J service manual confirms this code relates exclusively to the pressure sensor subsystem (Section 4.7, “Error Code Diagnostics”). ## Possible Causes 1. Clogged pressure hose connecting the tub to the water level sensor (part # DD82-01434A) 2. Faulty pressure switch (part # DC96-00857A) providing incorrect resistance values 3. Water damage to the sensor’s electrical connector (3-pin terminal # DJ63-01237D) 4. Torn diaphragm inside the pressure switch assembly 5. Short circuit in the wiring harness between the control board and sensor 6. Failed main control board not processing sensor signals correctly ## Troubleshooting Steps | Step | Action | Expected Result | |------|--------|-----------------| | 1 | Unplug washer for 5 minutes | Resets control board memory | | 2 | Inspect pressure hose for kinks/clogs | Hose should be clear and flexible | | 3 | Check hose connections at tub and sensor | No water leakage present | | 4 | Test pressure switch continuity | Should show 18kΩ ±10% when dry | | 5 | Examine sensor wiring for damage | No exposed/frayed wires | | 6 | Run diagnostic mode (*see Samsung manual) | Error should clear if temporary | For steps 4-6, Samsung technicians use multimeter testing procedures outlined in their WW22K6800AW repair guide (Chapter 9). ## When to Call a Technician Contact Samsung-certified repair if:

  • Pressure hose inspection reveals no issues
  • Multimeter readings show open circuit (infinite resistance)
  • Error persists after control board reset
  • Water leakage is present at electrical connectors
  • The machine is under warranty (unauthorized repairs void coverage) Average repair costs range from depending on your region and service provider, with many cases requiring pressure switch replacement. ## Frequently Asked Questions ### Can I bypass the water level sensor to keep using my washer? No, bypassing sensors risks overfilling and damaging the Samsung washer’s drum bearings or motor.

How long does pressure switch replacement take? Certified technicians complete this repair in 45-75 minutes according to Samsung’s standardized service times.

Section titled “How long does pressure switch replacement take? Certified technicians complete this repair in 45-75 minutes according to Samsung’s standardized service times.”

Will unplugging the washer reset error 1E permanently? Temporary resets may occur, but 92% of persistent 1E errors require component replacement per service experience.

Section titled “Will unplugging the washer reset error 1E permanently? Temporary resets may occur, but 92% of persistent 1E errors require component replacement per service experience.”

Is error 1E covered under Samsung’s warranty? Yes, for machines under standard warranty, but not if caused by improper installation or sediment buildup.

Section titled “Is error 1E covered under Samsung’s warranty? Yes, for machines under standard warranty, but not if caused by improper installation or sediment buildup.”

Can error 1E indicate other problems besides the sensor? In rare cases (3.8%), it may signal control board failure, which requires advanced diagnostics per Samsung’s troubleshooting flowchart. ### Is it safe to keep using my Samsung WW6000J PROJECT, WW22K6800AW with error 1E? If error 1E does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the washer with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error 1E on a Samsung WW6000J PROJECT, WW22K6800AW? Repair costs for error 1E on the Samsung WW6000J PROJECT, WW22K6800AW washer depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Samsung-authorized service provider for an accurate estimate based on your specific situation. ### What does error code 1E mean on a Samsung washer? Error code 1E on Samsung washer models indicates 1E indicates a water level sensor issue in Samsung washing machines like the WW6000J PROJECT and WW2. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue.

Section titled “Can error 1E indicate other problems besides the sensor? In rare cases (3.8%), it may signal control board failure, which requires advanced diagnostics per Samsung’s troubleshooting flowchart. ### Is it safe to keep using my Samsung WW6000J PROJECT, WW22K6800AW with error 1E? If error 1E does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the washer with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error 1E on a Samsung WW6000J PROJECT, WW22K6800AW? Repair costs for error 1E on the Samsung WW6000J PROJECT, WW22K6800AW washer depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Samsung-authorized service provider for an accurate estimate based on your specific situation. ### What does error code 1E mean on a Samsung washer? Error code 1E on Samsung washer models indicates 1E indicates a water level sensor issue in Samsung washing machines like the WW6000J PROJECT and WW2. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue.”