Samsung WW22K6800AW Washer

The Samsung WW6000J PROJECT (model WW22K6800AW) is a high-efficiency front-loading washer featuring advanced water level detection, foam control, and imbalance correction technologies. Its diagnostic system provides detailed error codes for troubleshooting mechanical, electronic, and sensor-related issues. The washer is designed for large-capacity loads with multiple fabric care programs.

Error Codes

Error Code	Description
1E	Water Level Sensor; The part of the hose where the water level sensor is located
AE2	The diagnosis of the I/O Board communication check
DE2	Door Check; Occurs if the Power switch is turned on/off continually
OE	Overflow Check; Water is supplied continually because the water level detection fails
UB	Unbalance Check; Caused by uneven laundry distribution
SUD	Foaming Detected; Occurs when excessive detergent foam is detected
8E	Mems PBA Check Detected; Fault in Mems PBA or data corruption
SF1	System Check; Micro Controller Operation Fail
SF2	System Check; Micro Controller Operation Fail
SF3	System Check; Micro Controller Operation Fail
1C	Check Mode; Diagnostic state triggered
4C	Check Mode; Diagnostic state triggered
BC2	Check Mode; Diagnostic state triggered

Common Issues

Door Lock Failures (DE/DE2): Often caused by door hook misalignment or power interruptions.
Overfoaming (SUD): Typically results from excessive detergent use; reduce detergent quantity.
Unbalance Errors (UB): Redistribute laundry evenly and avoid overloading.
Water Sensor Faults (1E/OE): Check hose connections and clean the sensor area.
Temperature Sensor Alerts (TE4): Ensure proper ventilation around the washer.

Technical Specifications

Type: Front-loading automatic washer
Capacity: Large capacity (exact kg/lbs varies by region)
Diagnostics: Advanced self-check system with 17+ error codes
Special Features: Foam detection, imbalance correction, microcontroller diagnostics
Control Panel: Encoder-key interface with buzzer feedback
Safety Systems: Door lock mechanism, overflow protection