Sharp KD-NCB9S7GW9 Dryer Error Codes
KD-NCB9S7GW9 Dryer Error Code Reference
Section titled “KD-NCB9S7GW9 Dryer Error Code Reference”The Sharp KD-NCB9S7GW9 (9 kg Condenser Dryer (EU)) uses the following diagnostic error codes:
| Error Code | Fault Description |
|---|---|
| E1 | Door not closed or door switch fault — cycle cannot start |
| E2 | Door lock fault — lock did not engage or release within the timeout |
| E3 | Drain fault (washer-dryer combo) — drum water not evacuated within timeout |
| E4 | Unbalanced load — drum vibration exceeds safe level during spin phase |
| E5 | Heating fault — drum temperature not reaching target or heating element circuit open |
| E6 | Temperature NTC sensor fault — inlet or outlet sensor open or short circuit |
| E7 | Drum motor fault — motor not rotating or drive circuit failure |
Select a code above for detailed causes, step-by-step repair instructions, and FAQs.