Samsung WF42H5000AW Washer
Model Overview
Section titled “Model Overview”The Samsung WF42H5000AW is a front-loading washing machine with a 4.2 cu. ft. capacity, featuring advanced washing technologies for efficient cleaning. It includes multiple wash cycles, energy-saving modes, and smart error detection for troubleshooting. The machine is designed for reliability and performance with intuitive controls.
Error Codes
Section titled “Error Codes”| Error Code | Description |
|---|---|
| LED | Error Type; Remarks |
| LE | Water Level Sensor; The part of the hose where the water level sensor is located |
| BE | Motor Driving error and Hall Sensor error; This occurs due to erroneous operation |
| NF | Water Supply error; Foreign material is entering the water supply valve. - The water supply valve is faulty |
| NF1 | Water Supply error; The cold and warm water supply hoses are wrongly engaged |
| ND | Drain error; The pump motor impeller is damaged internally. - The wrong voltage is applied |
| 2E | Power error; Check the consumer’s power conditions. : Make sure to check the operating voltage |
| PFAE | Communication error; Restarts from the cycle that was stopped due to the power issue |
| OE | Overflow Error; Water is supplied continually because the water level detection is faulty |
| DC | Unbalance error; As laundry causes this error, check the laundry. - Find the reason for the unbalance |
| SUDS | Foaming Detected; This occurs when too much foaming is detected. It is also displayed when excessive detergent is used |
| SF | System error; In case of EEPROM detected - In case of PBA problem - System Error |
| CAUSES | Causes; Water supply value fault • Main PCB fault • Freezing in the winter season |
| BZ1 | 1; Buzzer Circuit; Be generated sound when the menu key is pressed or the encoder is rotated |
Common Issues
Section titled “Common Issues”- Drainage Problems (ND/NF Codes) – Often caused by clogged filters or damaged pump impellers. Regularly clean the drain hose and filter.
- Error Codes Due to Unbalanced Loads (DC) – Redistribute laundry evenly to prevent mid-cycle interruptions.
- Excessive Foam (SUDS) – Use the correct detergent amount and type (HE detergent recommended).
- Power-Related Errors (2E/PFAE) – Verify stable power supply and check for voltage fluctuations.
- Water Supply Issues (NF/NF1/OE) – Inspect hoses for kinks, blockages, or incorrect connections.
Technical Specifications
Section titled “Technical Specifications”- Capacity: 4.2 cu. ft.
- Type: Front-Load Washer
- Motor Type: Digital Inverter
- Wash Cycles: Multiple presets including Heavy Duty, Delicates, and Quick Wash
- Energy Rating: ENERGY STAR certified
- Dimensions: 27” W x 38” H x 28” D
- Voltage: 120V, 60Hz
- Max Spin Speed: 1200 RPM
- Water Supply: Cold & Hot (with temperature control)
- Noise Level: < 50 dB (during wash cycle)