Samsung WD10T534ABW Washer
The Samsung WD10T534ABW is a high-efficiency front-loading washer featuring a 10kg capacity and advanced error detection system. Its digital inverter motor provides quiet operation while smart diagnostics help identify maintenance issues. The model includes comprehensive error codes covering water supply, motor control, and laundry imbalance scenarios.
Error Codes
Section titled “Error Codes”| Error Code | Description |
|---|---|
| 1C | Water level sensor hose damage detected |
| 3C2 | Motor driving error from PBA (unstable relay operation) |
| 3C3 | Motor driving error from PBA (unstable relay operation) |
| 4C | Foreign material in water supply valve |
| 4C2 | Water temperature exceeds 50°C in Wool/Lingerie mode |
| AC | Communication failure between main/sub PBAs |
| DC/DCI | Door switch contact error due to hook deformation |
| LC1 | Heater engagement fault (misplaced air hose) |
| OC/OF | Continuous water supply due to level detection failure |
| UB | Laundry imbalance detected |
| UC | Power condition fault (under/over voltage) |
| 6C | Detergent dispense motor constraint |
Common Issues
Section titled “Common Issues”- Water supply errors (4C/4C2): Often caused by clogged inlet filters or extreme water temperatures
- Motor instability (3C2/3C3): Typically indicates relay board issues requiring PBA inspection
- Door latch failures (DC/DC1): Verify door hook alignment and switch continuity
- Leak detection (LC1): Check air hose positioning and water sensor connections
- Detergent drawer jams (6C): Clean dispenser mechanism and verify motor operation
Technical Specifications
Section titled “Technical Specifications”- Capacity: 10kg
- Motor Type: Digital Inverter Motor
- Energy Rating: A+++
- Spin Speed: Up to 1400 RPM
- Water Supply: Cold and Hot (50°C max)
- Dimensions: 600 x 850 x 600mm (WxHxD)
- Special Programs: Wool, Lingerie, Allergy Care
- Diagnostics: Self-test mode with error code display