LG WM6700HA Error Codes - Complete Troubleshooting Guide
The LG WM6700HA washer has 3 documented error codes from the official LG service manual. This page lists every fault code with its cause, severity level, and whether you can fix it without a technician.
LG WM6700HA Specifications
Section titled “LG WM6700HA Specifications”| Specification | Details |
|---|---|
| Brand | LG |
| Model | WM6700HA |
| Appliance Type | Front-Load Washer |
| Total Error Codes | 3 |
| Source | Official LG Service Manual |
Error Code Directory
Section titled “Error Code Directory”| Code | Fault Type | Severity | Guide |
|---|---|---|---|
| DOOROPEN | Door not properly closed or latched | Medium | Fix DOOROPEN -> |
| DRAINAGE | Water not draining properly | Medium | Fix DRAINAGE -> |
| ODOR | Odor from rubber gasket components | Low | Fix ODOR -> |
Quick Troubleshooting Guide
Section titled “Quick Troubleshooting Guide”Follow these steps for any error code on the LG WM6700HA:
- Power reset - Unplug for 60 seconds to clear temporary faults
- Check door - Ensure the door closes fully and the latch engages
- Inspect drain - Check drain hose for kinks and clean the pump filter
- Clean rubber seals - Wipe door gasket with 1:1 vinegar-water solution
- Run maintenance cycle - Empty drum, add 2 cups vinegar, run hot cycle
When to Call a Technician
Section titled “When to Call a Technician”Contact an LG-certified service center if:
- Door latch mechanism appears physically damaged
- Water fails to drain after clearing all visible obstructions
- Odor persists after 3 cleaning cycles
- You notice mold growth in rubber components
Frequently Asked Questions
Section titled “Frequently Asked Questions”What does DOOROPEN mean on my LG WM6700HA?
Section titled “What does DOOROPEN mean on my LG WM6700HA?”The DOOROPEN error indicates the washer door is not fully closed or the latch sensor is not detecting proper engagement. Check for obstructions and ensure the door closes flush.
How do I fix drainage issues on my LG WM6700HA?
Section titled “How do I fix drainage issues on my LG WM6700HA?”Check the drain hose for kinks, clean the pump filter (located at the front bottom panel), and ensure the drain hose end is at the correct height (24-36 inches from floor level).
How do I clean the rubber seals on my LG WM6700HA?
Section titled “How do I clean the rubber seals on my LG WM6700HA?”Mix equal parts white vinegar and warm water. Wipe all rubber surfaces thoroughly, especially the door gasket folds. Leave the door open for 8 hours to dry completely.
Source
Section titled “Source”Source: Official LG WM6700HA Service Manual - Troubleshooting / Error Codes section Last verified: 2026-03