GE GFE28GYNFS Error Code PF

1. Home ›
2. GE ›
3. Refrigerator ›
4. GFE28GYNFS ›
5. PF

• Source: Official GE service manual
• Reviewed by: Geo Technical Editorial
• Published: March 1, 2026
• Updated: March 15, 2026
• DIY scope: Basic user checks are possible.

Error PF on GE : Power failure — refrigerator experienced a power interruption during operation. Follow the troubleshooting steps below to diagnose and fix this refrigerator issue. ## What Error Code PF Means on a GE GFE28GYNFS Power failure — refrigerator experienced a power interruption during operation ## What This Error Means Error code PF on your GE refrigerator is an informational alert indicating the refrigerator experienced a power interruption. This code appears after power outages, tripped circuit breakers, voltage spikes, or accidental unplugging while the refrigerator was running. PF is not an appliance malfunction — it is a notification that power was lost. After a PF, the refrigerator automatically resumes operation at its previous temperature settings. The main concern after a power failure is food safety: if the power was out for more than 2 hours, check food temperatures. A freezer that was fully packed and not opened during the outage will keep food frozen for up to 48 hours. A refrigerator section will typically stay below 40°F for 4 hours if the door remains closed. PF clears by pressing any button on the control panel. If PF appears repeatedly without a known power event, check the power outlet and circuit breaker for intermittent issues. ## Quick Diagnostic Summary | Detail | Value | |--------|-------| | Error Code | PF | | Severity | Low | | Appliance | GE GFE28GYNFS GE Refrigerator | | User-Fixable | Yes | | Applicable Models | PFE28KYNFS, GFE28GYNFS, PYE22KYNFS | ## Step-by-Step Troubleshooting | Step | Action | What To Do | Expected Result | |------|--------|------------|-----------------| | 1 | Press any control panel button to clear PF | Press the RESET PAD button or any temperature control button on the GE refrigerator display panel. PF will clear immediately and the display will return to showing current temperature readings. | PF code is cleared. Refrigerator display shows normal temperature readings. | | 2 | Check food temperatures for safety | If the power was out for an extended time, use a food thermometer to check temperatures in both compartments. The refrigerator should be below 40°F and the freezer should be below 0°F for food to remain safely stored. Discard perishable food that has been above 40°F for more than 2 hours. | Refrigerator compartment is below 40°F. Freezer is below 0°F. Food is safe for consumption. | | 3 | Verify power outlet and circuit breaker | If PF appeared without a known power outage, inspect the power outlet and power cord for any signs of damage. Test the outlet by plugging in a lamp or phone charger. Check the circuit breaker panel for any tripped breakers. Reset any tripped breaker by pushing fully to OFF then to ON. | Power outlet tests correctly with another device. Circuit breaker is in the fully ON position. | | 4 | Monitor for recurring PF | Over the next 24-48 hours, observe whether PF reappears without any known power events. Recurring PF can indicate a failing power outlet, a loose connection at the circuit breaker, or a failing main control board that is losing its internal power supply. | PF does not reappear during 48-hour monitoring period. Power supply to the refrigerator is stable. | | 5 | Install a surge protector if PF was caused by a voltage spike | If PF appeared during a storm or utility switching event, consider installing a refrigerator-rated surge protector (minimum 1,000 joules) on the refrigerator outlet. Voltage spikes from lightning or utility grid switching can damage control boards over time, even if PF is the only immediate symptom. | Surge protector is installed between the refrigerator power cord and the wall outlet. Refrigerator runs normally. | ## Frequently Asked Questions ### Is PF a serious error code? No. PF is an informational notification, not a component fault. It simply means power was interrupted. The refrigerator resumes normal operation automatically. The only action needed is to press a button to clear the code and check food safety if the outage was extended. ### How long can a GE refrigerator keep food safe during a power outage? A full freezer with the door kept closed will maintain safe food temperatures (below 0°F) for approximately 48 hours. A half-full freezer will maintain temperature for approximately 24 hours. The refrigerator compartment will stay below 40°F for approximately 4 hours with the door closed. A block of ice placed in the refrigerator section can extend this to 8-10 hours. ### PF appeared with no power outage — what does that mean? If PF appears without any known power event, possible causes include: a momentary voltage sag on the circuit (large appliance starting), a loose power cord connection at the outlet or refrigerator, a faulty outlet with intermittent contact, or a failing main control board. Monitor for recurrence and test the outlet before investigating the board. ### Does PF reset any temperature settings? No. GE refrigerators store temperature settings in non-volatile memory. After a power failure and PF code, the refrigerator returns to its previous temperature settings automatically. You do not need to reconfigure the temperatures. --- Last Updated: March 2026 · GE GE Refrigerator · Error Code PF ### Is it safe to keep using my GE with error PF? If error PF does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the refrigerator with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error PF on a GE ? Repair costs for error PF on the GE refrigerator depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a GE-authorized service provider for an accurate estimate based on your specific situation. ### What does error code PF mean on a GE refrigerator? Error code PF on GE refrigerator models indicates Power failure — refrigerator experienced a power interruption during operation. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue. ### Is it safe to keep using my GE with error PF? If error PF does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the refrigerator with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error PF on a GE ? Repair costs for error PF on the GE refrigerator depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a GE-authorized service provider for an accurate estimate based on your specific situation. ### What does error code PF mean on a GE refrigerator? Error code PF on GE refrigerator models indicates Power failure — refrigerator experienced a power interruption during operation. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue.