Skip to content
Appliance Error Codes

Error E2 on Daikin FDXS50F Portable AC | Causes & Fix

Error E2 on Daikin : Coil temperature sensor fault. Follow the troubleshooting steps below to diagnose and fix this portable-ac issue. ## What Error Code E2 Means on a Daikin FDXS50F Error E2 on the Daikin FDXS50F window AC indicates the indoor coil temperature sensor (NTC thermistor) is faulty. The coil NTC is mounted on the indoor heat exchanger and is used for freeze protection — it prevents the coil from icing up by cycling the compressor. If the coil NTC fails, freeze protection cannot operate correctly and E2 is raised. When E2 appears, the Daikin portable ac pauses normal operation to protect internal components from potential damage. Not every E2 fault requires a professional engineer — many are resolved through careful inspection and routine maintenance. Work through each diagnostic step below in sequence, starting with the simplest check, to identify the root cause efficiently before considering part replacement or arranging a service call. ## Symptoms - E2 on display

  • Possible ice on indoor coil
  • Freeze protection not working correctly ## Common Causes - Coil temperature sensor fault ## Tools You May Need - digital multimeter
  • Phillips screwdriver ## Step-by-Step Repair Guide | Step | Action | Result | |------|--------|--------| | 1 | Unplug the AC. Remove the front panel and locate the coil NTC (clipped to the coil fins). | Sensor located — continue to step 2 if the issue persists. | | 2 | Disconnect the sensor connector and test resistance: at 25 °C expect ~10 kΩ. | Resistance measured — continue to step 3 if the issue persists. | | 3 | Replace if OL or 0 Ω. | Sensor replaced — continue to step 4 if the issue persists. | | 4 | Refit front panel, restore power, and test cooling. | E2 cleared — if the fault remains, contact a qualified technician. | ## Safety Precautions Unplug before accessing internal sensors. The coil fins are sharp — use caution when handling the indoor coil area. ## Estimated Repair Time and Difficulty Most portable ac error code E2 faults can be assessed and addressed in 30–90 minutes using the steps above. The diagnostic process requires only basic tools: a multimeter and standard screwdrivers cover the majority of checks described here. If a replacement part is required, allow 1–5 working days for delivery. A trained technician with access to the correct diagnostic equipment will typically resolve this type of fault within a single service visit. ## When to Call a Technician Contact a Daikin authorised service technician if: the fault persists after following all the steps above; if PCB-level or refrigerant-circuit work is required; or if you are not comfortable working with electrical or mechanical components. When calling, have the full model number, the error code displayed, and a brief description of any sounds or symptoms you noticed before the fault appeared — this helps the technician prepare the correct parts and tools. ## Frequently Asked Questions Q: Can E2 cause water dripping from the front of the unit? Yes — if the coil NTC fails and freeze protection does not operate, the coil can ice up and then melt, producing excess water. Q: Is the coil NTC sensor interchangeable between Daikin window AC models? Connector types and lengths vary. Always order by model number. Q: Will E2 appear if the filter is dirty? No — E2 is a sensor fault. However, a dirty filter causes poor airflow, which can cause coil icing, which could falsely suggest a sensor issue. ### Is it safe to keep using my Daikin with error E2? If error E2 does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the portable-ac with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error E2 on a Daikin ? Repair costs for error E2 on the Daikin portable-ac depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Daikin-authorized service provider for an accurate estimate based on your specific situation. ### What does error code E2 mean on a Daikin portable-ac? Error code E2 on Daikin portable-ac models indicates Coil temperature sensor fault. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue. ### Is it safe to keep using my Daikin with error E2? If error E2 does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the portable-ac with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error E2 on a Daikin ? Repair costs for error E2 on the Daikin portable-ac depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Daikin-authorized service provider for an accurate estimate based on your specific situation. ### What does error code E2 mean on a Daikin portable-ac? Error code E2 on Daikin portable-ac models indicates Coil temperature sensor fault. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue.