Skip to content
Appliance Error Codes

Bosch WGB24600UC E17 Error Code | E17 Water Supply Error

Error e17 on Bosch wgb24600uc: Water supply error — insufficient water entering the drum due to low pressure or. Follow the troubleshooting steps below to diagnose and fix this washer issue. ## What Does E17 Mean on a Bosch WGB24600UC? Your Bosch washing machine is displaying an E17 error code, which means the machine is not receiving sufficient water during the fill phase. Bosch washers monitor how long it takes to fill to the required water level — if filling takes too long (typically more than 10 minutes for the initial fill), E17 is triggered. This can be caused by a closed supply valve, low water pressure, a blocked inlet filter, a kinked supply hose, or a faulty water inlet valve (solenoid valve). ## Fault Details | Field | Value | |-------|-------| | Error Code | E17 | | Appliance | Bosch WGB24600UC 500 Series 24-inch Front Load Washer | | Fault Type | Water supply error | | Severity | Medium | | User Serviceable | Yes — follow steps below | | Applicable Models | WGB24600UC, WGB246AXUC, WQB245AXUC | ## Common Causes - Water supply tap (valve) behind the machine is not fully open

  • Inlet hose kinked, pinched, or too long causing flow restriction
  • Inlet filter screen (mesh filter in the hose fitting) blocked by mineral deposits or debris
  • Low household water pressure — below Bosch minimum requirement (~1 bar / 14 PSI)
  • Water inlet solenoid valve coil failed — valve not opening fully to allow water flow
  • Multiple water-using appliances running simultaneously reducing flow to the washer ## Step-by-Step Troubleshooting | Step | Action | What To Do | Expected Result | |------|--------|------------|-----------------| | 1 | Check the water supply tap | Locate the water supply tap (valve) behind or under the washing machine. Ensure it is fully turned counterclockwise (fully open). Test the flow by briefly disconnecting the inlet hose and placing it in a bucket — water should flow strongly when the tap is open | Strong water flow confirmed at the tap — issue is in the machine or hose | | 2 | Inspect the inlet hose for kinks | Pull the machine away from the wall and inspect the full length of the water inlet hose. Straighten any kinks and ensure the hose is not pinched by the machine’s weight or caught under cabinet legs | Hose is straight with no kinks; flow restored | | 3 | Clean the inlet filter screen | Turn off the water supply tap. Unscrew the inlet hose from the back of the machine (have a towel ready). Inside the connection port on the machine, there is a small mesh filter screen. Use pliers to pull it out, rinse under running water, and use a small brush to clear any mineral deposits | Filter screen clean and free of debris — reinstall and test fill | | 4 | Test water pressure at the tap | Bosch washers require a minimum water pressure of approximately 1 bar (14 PSI) and recommend 2–8 bar (29–116 PSI). If multiple appliances (dishwasher, another washer) are running simultaneously, try running the washer when other appliances are off | Water fills within 10 minutes — E17 was a pressure or flow issue | | 5 | Contact Bosch service for inlet valve replacement | If flow, hose, and filter are all confirmed clear but E17 persists, the water inlet solenoid valve may have failed. The valve is located inside the machine behind the water connection. Contact Bosch at 1-800-944-2904 for professional diagnosis and valve replacement | E17 resolved after inlet solenoid valve replacement | ## Frequently Asked Questions ### What water pressure do Bosch washers need? Bosch front-load washers require a minimum static water pressure of 1 bar (14.5 PSI) and a maximum of 10 bar (145 PSI). The recommended operating pressure is 2–8 bar. If your home’s water pressure is below 1 bar, E17 will appear regularly and the machine will not fill adequately. ### How often should I clean the inlet filter? Bosch recommends cleaning the water inlet filter screen every 3–6 months, especially in hard water areas. A blocked inlet filter is one of the most common causes of E17 and is a quick, inexpensive fix that does not require professional service. ### Can a kinked hose damage my washer? A kinked inlet hose causes restricted flow rather than direct damage. However, if the machine repeatedly triggers E17 due to a kinked hose and runs repeated fill attempts, this can put stress on the water inlet valve solenoid. Straighten the hose and monitor for E17 resolution. ### What is a solenoid valve and how do I know if it has failed? The water inlet solenoid valve is an electrically operated valve that opens when the control board energizes its coil, allowing water to flow into the drum. It fails when the coil burns out (open circuit) or when the valve body becomes stuck closed by scale. A technician tests it by measuring coil resistance and checking whether the valve opens when voltage is applied. --- Source: Bosch 500 Series 24-inch Front Load Washer service documentation. Last Updated: March 2026 ### Is it safe to keep using my Bosch wgb24600uc with error e17? If error e17 does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the washer with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error e17 on a Bosch wgb24600uc? Repair costs for error e17 on the Bosch wgb24600uc washer depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Bosch-authorized service provider for an accurate estimate based on your specific situation. ### What does error code e17 mean on a Bosch washer? Error code e17 on Bosch washer models indicates Water supply error — insufficient water entering the drum due to low pressure or blocked inlet filte. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue. ### Is it safe to keep using my Bosch wgb24600uc with error e17? If error e17 does not indicate an immediate safety hazard such as a gas leak, electrical short, or water flooding, you can continue limited use while monitoring the appliance. However, running the washer with an active error code increases the risk of further damage. Address the underlying issue as soon as possible. For high-severity errors, disconnect the appliance and contact a qualified technician. ### How much does it cost to fix error e17 on a Bosch wgb24600uc? Repair costs for error e17 on the Bosch wgb24600uc washer depend on the root cause. DIY fixes such as cleaning filters, resetting the unit, or reconnecting loose wires cost nothing beyond basic tools. If a component replacement is needed, parts and labor from a certified technician are the main expenses. Contact a Bosch-authorized service provider for an accurate estimate based on your specific situation. ### What does error code e17 mean on a Bosch washer? Error code e17 on Bosch washer models indicates Water supply error — insufficient water entering the drum due to low pressure or blocked inlet filte. This error is detected by the appliance’s internal diagnostic system and displayed to alert the user that attention is needed. Refer to the troubleshooting steps above for guidance on resolving this issue.